Hydraulic Breaker Working Pressure: What Operators Need to Check

Hydraulic Breaker Working Pressure : What Operators Need to Check

Hydraulic pressure is one of the most important factors affecting hydraulic breaker performance. If the pressure is too low, the hydraulic breaker may deliver weak impacts. If it is too high, seals, valves, and other internal components may suffer damage.

Understanding hydraulic breaker working pressure helps operators maintain performance and avoid unnecessary repairs.

What Is Hydraulic Breaker Working Pressure?

Working pressure is the hydraulic oil pressure required for a breaker to operate within its designed performance range. It is generally measured in bar.

What Is Hydraulic Breaker Working Pressure?

However, working pressure and relief pressure are not the same.

  • Working pressure: The pressure required during normal breaker operation.
  • Relief pressure: The maximum pressure setting at which the hydraulic circuit’s relief valve protects the system.

Both must be configured according to the excavator and breaker manufacturers’ specifications.

What Pressure Should a Hydraulic Breaker Operate At?

There is no single pressure suitable for every hydraulic breaker.

The correct setting depends on the breaker model, hydraulic design, and carrier configuration. Always consult the technical specification sheet before installation or adjustment.

Do not increase pressure simply to achieve stronger impacts.

Five Things Operators Should Check

1. Breaker pressure specifications

Confirm the recommended working pressure and maximum permitted pressure.

2. Excavator relief valve

Check that the auxiliary hydraulic circuit is correctly configured for the breaker.

3. Hydraulic hoses and connections

Inspect for leaks, damaged hoses, loose fittings, and restrictions.

4. Return-line back pressure

Excessive back pressure can affect breaker operation and increase heat.

5. Hydraulic oil temperature

Unusually high oil temperature may indicate excessive pressure, incorrect flow, restrictions, or another hydraulic problem.

What Happens When Hydraulic Pressure Is Incorrect?

ProblemPossible effect
Pressure too lowWeak or inconsistent impact
Pressure too highExcessive stress and component damage
Incorrect relief settingPoor performance or system protection activating too early
Excessive back pressureOverheating and reduced efficiency

How to Maintain Correct Hydraulic Pressure

Operators should inspect hydraulic connections, monitor oil temperature, and follow the recommended maintenance schedule.

Pressure measurements and adjustments should be carried out using suitable testing equipment by a qualified technician.

Beilite Hydraulic Breaker Specifications

When selecting a Beilite hydraulic breaker, check the model’s recommended operating pressure and flow requirements before installation.

Matching these specifications to your excavator helps achieve reliable performance and reduces unnecessary hydraulic system stress.

View the Beilite hydraulic breaker range and technical specifications.

Frequently Asked Questions

1. What is the correct working pressure for a hydraulic breaker?

It varies by model. Use the manufacturer’s specified operating pressure rather than a general industry figure.

2. Does higher hydraulic pressure mean stronger impact?

Not necessarily. Breaker impact energy depends on its design and operating conditions. Excessive pressure can cause damage rather than improve performance.

3. How can I check hydraulic breaker pressure?

A qualified technician can measure pressure using suitable hydraulic testing equipment and compare the results with the manufacturer’s specifications.

REQUEST QUOTE 

Scroll to Top